
Preliminary
When you take your telephone off-hook while in temporary Ring-through mode,
Tel-Lynx
will remind you that the Do-Not-Disturb schedule is being overridden
and that all callers are allowed through before providing a dial tone.
Timers
Tel-Lynx
maintains a timer for inside line 1 and a separate timer for inside line 2.
Timers can be set for up to 720 minutes (12 hours).
To set a timer
:
Take your telephone off-hook and at the dial tone, press
#
7
.
To set
minutes
: enter number of
minutes
followed by
#
.
To set
minutes
and
seconds
: enter
minutes
, then
*
,
seconds
, then
#
.
To set
hours
,
minutes
, and
seconds
: enter
hours
, then
*
,
minutes
, then
*
,
seconds
, then
#
.
To set
seconds
only: enter
*
, then
seconds
, then
#
.
To
cancel
the timer enter
#
only.
To set the timer, the final entry must always be the
#
key.
After you’ve set the timer, it will start to count down. You can then hang up or
listen to the countdown. While you’re listening to the countdown, to cancel the
existing timer, press
#
, or to change the remaining time, enter a new amount
of time and then press
#.
If someone calls while you are listening to the
timer count down,
Tel-Lynx
will announce the caller. You can then hang up, the
telephone will start ringing, and you can answer.
After you’ve set the timer and hung up, whenever you take the telephone off-
hook you will hear
Tel-Lynx
announce the remaining time followed by the dial
tone, indicating that you can dial out. Remember that you don't have to wait for
Tel-Lynx
to finish announcing before taking any action, including dialing out.
To change or cancel the timer, take the telephone off-hook, then press
#
7,
and either press
#
to cancel the existing timer, or enter a new amount
of time and then press
#.
When the time is up,
Tel-Lynx
will ring the associated inside line with a series of
single short rings if set on line 1, or a series of two short rings if set on line 2.
(Short rings are 4 seconds instead of 6 seconds.) If unanswered, the telephone
will continue to ring for about 6 minutes and then stop. When you pick up the
inside line,
Tel-Lynx
will tell you that the timer has reached zero.
If the timer goes off while you’re on a call using the telephone line used to set the
timer, you will hear a beep. Press
flash
, and the timer message will play. Then
press flash or
0
to return to your call.
Copyright 2013-2015, nVideon, Inc. Atlanta, GA All Rights Reserved Worldwide
Page 44 of 76