INSTALLATION
The RTD-200 can be terminated directly at the controller
using the supplied 1/2 in NPT fitting. In this configuration,
no additional extension wire is required.
RTD wired directly to controller
(Distance from sensor bulb to controller
must be less than 4 ft)
1/2 in Conduit
Terminate at
appropriate
terminal block
1/2 in NPT
fitting
Electronic
controller
Terminate at
appropriate
terminal block
Electronic
controller
Note:
RTD should be placed in
a typical ambient location.
Note:
RTD should be placed in
a typical ambient location.
4 ft or less
RTD wired with splice box
1/2 in Conduit Splice box
(provided by others)
1/2 in NPT
fitting
RTD extension wire
RTD-200 WIRING
Red (Source)
White
Red
Red
Red (Compensate)
Field Wiring
White (Common return)
Electrical Schematic of RTD
Connect the wires as shown.
nVent.com
North America
Tel +1.800.545.6258
Fax +1.800.527.5703
Europe, Middle East, Africa
Tel +32.16.213.511
Fax +32.16.213.604
Asia Pacific
Tel +86.21.2412.1688
Fax +86.21.5426.3167
Latin America
Tel +1.713.868.4800
Fax +1.713.868.2333
©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Raychem-IM-H56998-RTD200-EN-1805
PN P000000095
