With all the wires connected (including the C/X wire), and the
thermostat securely attached to the wall, it is time to turn the AC
power back on. Turn the breaker to the ON position at the breaker
panel.
ON
OFF
STEP
3
CONNECT POWERSHIFT GATEWAY
The PowerShift gateway device must be connected to your Internet router to enable the PowerShift system to work properly.
A
Connect the provided Ethernet cable between the
gateway Ethernet port and any available port of your
home router.
B
Connect the provided 5VDC power supply between the
gateway and a 120 VAC power source that will always stay
powered on.
Startup sequence
After plugging in the device the three LEDs at the top of gateway
will gradually turn solid green.
Gateway
Router
Power Supply
A
A
B
B
Page 5