4
SENSITIVITY
Set the detection range using the S7 & S8 DIP switches as shown below.
RATINGS
Power supply :
220-240VAC 50/60Hz
Rated Load :
400W (Inductive) & 800W ( Resistive)
Operating Temperature:
-
25
°
C …+60
°C
FAULT FINDING
If you experiencing a problem please check through the following before making contact with NVC:
Fault - Load does not come on
Check to see if the live supply to the circuit is good.
If the supply & wiring are good, check the LUX setting. Increase the LUX level setting to allow the sensor to turn
on at a higher ambient light level.
Fault - Lights do not go off
Ensure that the area is left unoccupied for longer than the selected timer setting.
Make sure that the sensor is not adjacent to circulating air, heaters or lamps.
If the unit “false triggers” reduce the SENSITIVITY level to narrow the area of detection.
Ensure luminaire is not connected in parallel with other luminaires containing MW sensors
