NuPower
TM
11B02A-TAC User Manual
Rev 1.1
8
4
HARDWARE INTERFACE
•
The RF Input connector is TNC (female).
•
The RF Output connector is N-type (female).
•
The pin-out definitions for the 3 pin bayonet connector are provided in Table 5.
The RF Out N-type connector is the antenna connection. This connection should
always be loaded into 50
Ω
, otherwise the PA could be damaged.
4.1
INTERFACE CABLE HARNESS
The cable harness that connects the host controller to the 3 pin bayonet connector of the NuPower
11B02A-TAC is made up of 2 wires.
Table 5: NuPower 11B02A-TAC Interface Pin-Out Definitions
Pin No.
Pin Name
I/0
Description
1
V Supply
I
Primary Power (+28 VDC)
2
N/C
N/A
No Connect
3
GND
I
Signal and Power Ground
Figure 4: Bayonet Connector Socket Locations
4.2
DC POWER
The nominal supply voltage for the NuPower 11B02A-TAC is +28 VDC; however, the amplifier module is
