NuMaker-M071MD
Jan. 05 2021
Page
16
of 46
Rev 1.00
N
UMA
K
E
R
-M0
71
M
D
US
E
R MA
NUA
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
3.4
Power Supply Configuration
The NuMaker-M071MD is able to adopt multiple power supplies. External power sources include NU1
Vin (7 V to 12 V), V
DD
(depending on the target chip operating voltage), and PC through USB connector.
By using switches and voltage regulator, multiple power domains can be created on the NuMaker-
M071MD.
3.4.1
VIN Power Source
Table 3-4 presents the Vin power source.
Connector
Net Name in
Schematic
Description
NU1 pin8
NU1_VIN
Board external power source, with voltage range from 7
V to 12 V. The voltage regulator UP2 converts the NU1
pin8 input voltage to 5 V and supplies it to NU1_5VCC.
Table 3-4 Vin Power Source
3.4.2
5 V Power Sources
Table 3-5 presents the 5 V power sources.
Connector
Net Name in
Schematic
Description
ICEJ3
USB_HS_VBUS
ICE USB connector supplies 5 V power from PC to
M071 target board and Nu-Link2-Me.
J2
USB_VBUS
USB connector on NuMaker-M071MD supplies 5 V
power from PC to M071 target board and Nu-Link2-Me.
NU1 pin5
NU1_5VCC
ICEJ3, J2 or NU1 pin8 supplies 5 V power to NU1 pin5.
NU1 pin5 supplies 5 V power to target chip or Arduino
adapter board.
Note:
M071 operating voltage range is from 2.5 V to 5.5
V.
Table 3-5 5 V Power Sources
