1.
Obtain a blood sample
Press the lancing device against the site to be lanced. Press the release button to
puncture the site. Squeeze your finger until a drop of blood forms. Wipe away the
first blood drop and squeeze until a second small blood drops forms.
2.
Apply the blood sample to the test strip
Quickly apply the blood sample to the absorbent hole of the test strip. Make sure
the confirmation window of the test strip is completely filled with the blood sample.
Quickly remove your finger from the test strip when the countdown (from 5 to 1)
begins on the monitor display.
3.
Test result will appear on the monitor
Note: The results obtained from the glucose monitor are plasma-calibrated. This helps
you and your physician or other qualified healthcare providers to compare your monitor
results with laboratory tests. Refer to the instructions given by your physician or other
qualified healthcare providers, do not deviate from these instructions on the basis of the
result without first consulting your physician.
4.
Discard the used test strip and lancet. Remove the used test strip from the monitor
using a small amount of tissue paper. Discard the used test strip and lancet
properly. (Tips: Prior to disposal, stick the lancet into the cover.)
