HOW TO USE
Remove the packaging, check device, power supply and cord if any damage.
Maximum continuous usage is about 20 minutes.
Never stand up in the Foot Spa.
•
Plug the power cord into
an electrical outlet. Ensure that the Control Dial is set to ‘0’
before plugging the power cord into an electrical outlet. Route the power cord so
that it does not pose a trip hazard.
•
Fill the foot spa up with warm water.
•
Sit comfortably in a chair and place your feet into the Foot Spa.
•
Turn the Control Dial to the desired setting:
o
0 = OFF
o
1 = Vibration
o
2 = Red LED Light
o
3 = Vibration with Red LED Light
•
After use, turn the Control Dial to ‘0’ and remove the power cord from the electrical
outlet.
•
Pour the water out of the Drain Spout to empty.
NOTE: To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
CLEANING AND MAINTENANCE
•
After unplugging, clean the device with a soft, damp cloth using NO abrasive cleaners.
•
Keep away from all solvents or harsh detergents.
•
DO NOT place/submerge the unit in any type of liquid/cleaner.
•
DO NOT attempt to service/repair the unit.
•
Place in a safe, cool and dry place when not in use.
