5
Insert the output end of supplied adapter into the input jack at the bottom of the appliance (see
above image). Make sure the filter and the bottom cap are fully assembled, then place the
appliance on a flat surface.
Plug the adapter into a power outlet.
2.
Turn on/off and settings
Once the appliance is plugged in, the LED indicator light around the power button will turn red
indicating the appliance is in ‘standby’ mode.
Press the power button to turn the appliance to low speed (the indicator LED surrounding the
power button will turn light blue in color).
Press the power button again to turn the appliance to high speed (the indicator LED surrounding
the power button will turn bright blue in color).
Press the power button again to turn the appliance off.
3.
Ion function
The ion generator inside the appliance provides millions of negative ions and turns on
automatically when the appliance is on. The ion generator turns off when the appliance is turned
off.
Cleaning & maintaining your Air Purifier
Always make sure the appliance is turned off and unplugged before cleaning.
1.
Rotate the bottom cap anticlockwise to open and detach the bottom cap.
2.
To change the filter, please remove the old HEPA Filter from the appliance and insert the new
filter.
3.
Place the bottom cap back onto the appliance and rotate clockwise till you hear it click in place.
This indicates that the bottom cap is secured to the appliance.
4.
The appliance can now be operated normally after being plugged in.
HEPA Filter replacement
Replace the HEPA filter every 6 - 9 months of usage.
To buy new HEPA Filter, please visit
Cleaning the surface of the housing
1.
Turn off the appliance and unplug the adapter.
2.
Use a soft cloth to clean the surface of the housing.
