6
Player Portfolio Audio System
| Product Manual
NV-P3500-XX 3-ZONE PLAYER (ETHERNET - B&O ICE POWER AMPLIFICATION)
FRONT PANEL
1
3
2
Item
Name
Description
1
Power Button
Toggles the power on and off. Used in the reset procedure for each zone
2
Setup Buttons
Setup button used in the initial system setup process. Used in the zone reset procedure
3
Zone 3 USB**
USB connection port for adding digital music files to the system music library. Scans USB
hard drive content and automatically adds to the library
BACK PANEL
1
2
6
3
4
5
Item
Name
Description
1
Ethernet
RJ45 ports for a wired connection to a network router. Use one port for connection
NOTE:
It is not recommended to daisy-chain connectors to other devices. Each unit requires an individual connection to a router
or switch.
2
Zone 1 and Zone 2 USB
USB connection port for sharing music content from a storage device. Each port accepts a separate drive
3
Trigger In
Trigger Out
Optional input for a 3-12 volt input trigger (possible use with a future firmware release)
3.5mm output voltage (5 V, 20 mA) trigger for external equipment. Turns on external amp when audio is
present on zone
4
Line In/Line Out*
RCA analog line-level input port/RCA analog line-level output port. Each zone represents an independent
input/output
5
Speaker Outputs***
Speaker connection ports. Each zone has a modular connector
6
AC
Universal AC power supply connection port
* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more
player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.
** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.
*** Bang & Oulfsen intelligent Ice power
®
audio technology is used in the P3500 for superior amplification.
