3
Crossover Main Screen
Crossover provides an option for a low pass filter for the amplifier. Choose
from one of the following options:
• LFE (Default setting)
• 40 - 250 HZ
Phase Screen
• 0-180
Lock Control Main Screen
Locks the menu for the amplifier controls to prevent accidental changes.
• Off
• On
Factory Reset
• Yes: Resets all amplifier controls to the default settings.
• No
Power Options Screen
This setting sets the power state. Choose from one of the following options:
•
Switch:
The amplifier is always on. This is the default setting.
•
12 V Trigger:
The amplifier turns on automatically upon receiving a 12 V
input signal. When the 12 V signal is removed, the amplifier automatically
goes into standby mode.
•
Audio Sensor:
The amplifier turns on automatically upon receiving an
audio input signal. When the amplifier no longer receives a signal, it
automatically moves into a standby state after 15 minutes.
IR - Device ID
Assigns an IR ID between 1 and 4 to the amplifiers in the system.
• 1
• 2
• 3
• 4
Exit Menu Screen
• Press the knob to exit the menu for the controls and bring up the Home/
Volume screen.
