Nuvo Cocerto NV-I8GXS, Руководство по установке

Страница: 11 / 41

De vi ce 1
Co nn ec t to
NV- I8 GM
Co nc er to E Z Po rt
Mo de l NV- I8 GE ZP
ww w.n uv ot ec hn ol og ie s. co m
Nu Vo Tech no lo gi es L LC H eb ro n, K en tu ck y US A
De vi ce 2 De vi ce 3
De vi ce 4 De vi ce 5 De vi ce 6
R
SYS ON
EXT. MUTE
SUM1
3033118
C US
CONFORMS TO
UL STD.6500
CERTIFIED TO
CAN/CSA STD.E60065
NuVo Technologies Cincinnati Ohio USA
FUSE:T5 A 120V 60Hz 500W
MODEL NV-I8DM
SIX SOURCE EIGHT ZONE
AUDIO DISTRIBUTION SYSTEM
www.nuvotechnologies.com
VARIABLE
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
RS-232
CONNECT TO
NV-I8X
USE NV-SLC1
CABLE
CONNECT TO
NV-I8EZP1
USE NV-NC1
CABLE
USE CNLY WITH 250V FUSE
SUM2
OUTPUT POWER
20W/6OHM X2
ZONE 7&8
SYSTEM NETWORK DIGITAL LINK
PROGRAM
SOURCE LINK
SOURCE INPUTS
ZONE 1 ZONE 3 ZONE 2
CONNECT TO
NV-I8X
USE NV-SLC1
CABLE
1 2 3 4 5 6
1 2 3 4 5 6
ZONE 1 ZONE 3 ZONE 2
OUTPUT POWER OUTPUT POWER OUTPUT POWER
20W/6OHM X2 20W/6OHM X2 20W/6OHM X2
VARIABLE
OUTPUT
VARIABLE
OUTPUT
VARIABLE
OUTPUT
FIXED
OUTPUT
FIXED
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
TIP=L
RING=R TIP=L RING=R
L
AUDIO OUT AUX IN
R
TRIGGER
ON=+12V
AUDIO
OUTPUT
TUNER B ANTENNA INPUT
IN
USE ONLY NuVo
NV-T2PAS
POWERED ANTENNA SYSTEM
9
V. Connecting the EZ Port to the Grand Concerto Amplifier
(Fig. 4)
When the EZ Port is installed in the wall, the only part visible
should be the faceplate and four RJ45 jacks. The supplied
pre-terminated network cable can then be plugged into one
of the six available jacks and into the Network connection on
the back of the Grand Concerto Amplifier. Any CAT5 cable
terminated using 568A or 568B network wiring will suffice
should you need a longer connection. Remember, it is
important to terminate the cable the same way on both
ends.
Fig. 4
VI. Attaching Audio Source Equipment (Fig. 5)
Each piece of audio equipment is connected to the Grand
Concerto amplifier with standard stereo RCA cables. Attach
an RCA cable to the corresponding audio output on the
source equipment and to the desired source input on the
back of the Grand Concerto amplifier. The numbered input
for each source is important in the configuration of the
system. This will be covered in detail in the Grand Concerto
Configurator portion of this manual.
Fig. 5
Setting up the T2G Tuners, M3 Audio Server, T2SIR Tuner, and
NuVoDock for iPod for use with NuVoNet
A feature of the Grand Concerto System is its ability to
automatically communicate with the T2G AM/FM and
Satellite Tuners, the M3 Audio Server and T2SIR Sirius ready
tuner, and the Wireless and Wired NuVoDocks for iPod. The
communication happens through the EZ Port connection
hub, across a communication protocol called NuVoNet.
Although software programming is not necessary for this
function, configuring the installation through the
Configurator Software prior to installation has distinct
advantages, see
IX. Grand Concerto Configurator Software.
When the T2G Tuners or M3 Server are plugged in for the
first time, they will display a prompt to select a source input
number for the Grand Concerto. For NuVoNet to
communicate properly, you should have already connected
the NuVoNet components to one of the six “Peripheral
Device” inputs on the face of the EZ Port.
T2G Tuners
Each of the T2G Tuner components houses two individual
AM/FM or Satellite receivers, which have their own display
on the front panel. Once the T2G is plugged in and the
NuVoNet CAT-5 is connected to the EZ Port and initial
display,
OPERATING MODE will appear for each tuner. Below
this, the choices are STAND ALONE, SOURCE 6, SOURCE 5,
SOURCE 4, SOURCE 3, SOURCE 2, and SOURCE 1 . Stand Alone
is automatically highlighted at initial startup. Selecting the
appropriate Grand Concerto source input is accomplished by
turning the Select knob for each tuner counter-clockwise
until the desired source input number is highlighted. It is
selected by pushing the Select knob. Once this is complete,
the Grand Concerto NuVoNet will recognize that source.