Nuvico DV turbo NVDV4-16000, Инструкция по эксплуатации

Страница: 103 / 129

DV TURBO SERIES DVR
102
①
Set Name
The set name can be manually entered for an easier identification of an individual DVR. The DVR Host
Name is entered automatically with Auto Scan.
②
IP
Enter the IP address or the host address of the DVR. The IP address is entered automatically with Auto
Scan.
③
Port
The default port for CMS is 80. The port is entered automatically with Auto Scan.
④
Administrator’s Password
Enter the administrator’s password to access the DVR. The password is entered as “000000” with Auto
Scan.
⑤
Apply
When editing a DVR, click on Apply to put the new settings in effect. Please note that the DVR set needs
to be highlighted.
⑥
Auto Scan
Auto Scan scans for any DVRs connected within the Local Area Network. As it adds DVRs automatically,
it will ignore DVRs already on the list. By default, Auto Scan will enter the Set Name, IP address, Port,
and the password with the default DVR settings.
⑦
Add To List
When a DVR is entered manually, click on Add To List after entering all the values.
⑧
Del From List
When a DVR needs to be removed from the list, highlight the DVR to be removed, and then click on Del
From List .
⑨
Setup
If the settings of the DVR needs to be modified after adding the DVR, click on Setup to open the DVR
settings window.
⑩
Property
Property displays general information about a DVR, such as DVR name, IP address, connection port,
Model number, CPU and MICOM version, number of cameras and the compression method.