21
3.6 Shortcut of Preset Program
After selecting the desired scene, press No. (
1
to
240
), and press the
CTRL
and
PRST
keys
subsequently. The current view will be stored to the selected Preset number if the Preset number
is empty. If selected Preset number is not empty, “
OVER WRITE
” message will be displayed on
the monitor and select the “OK” and push the
Joystick
to the right to overwrite.
Example
:
1 , 0 , 1
+
CTRL
+
PRST
keys will store current view as Preset no.
101
. In this case,
focus will be programmed as Auto, dwell time will be set to 3 second, and the current
AE mode will be programmed.
3.7 Tour
(Shortcut:
TOUR
)
There are 8 programmable Tours. Each Tour consists of up to 42 Preset positions, Patterns, Scans
or other Tours (second-level). Using second-level Tours, it can be expanded to over 300 functions
in a single Tour.
TOUR SETUP
NUMBER : 01
TITLE : T01
SCAN TYPE : NORMAL
SPEED : -- STEP
TOUR FUNC
SAVE AND EXIT(ESC TO CANCEL)
TOUR FUNC SETUP
(CTRL KEY)
DWELL : -- SEC
003 A04 --- --- ---
--- --- --- --- ---
--- --- P01 --- ---
--- T02 --- --- ---
--- --- --- --- ---
--- --- --- --- ---
--- --- --- --- ---
--- --- --- --- ---
EXIT(ESC TO EXIT)
---
Blank position
SCAN TYPE
NORMAL, VECTOR
DWELL
03 ~ 99 seconds
003
Preset (1 ~ 240)
A04
Auto Scan (1 ~ 8, 10 ~ 17)
P01
Pattern (1 ~ 8)
T02
Tour (1 ~ 8)
Follow the steps below to program the Tours:
1. Press the
MENU
key to display the main menu on the monitor. Scroll to Tour and push the
Joystick
to the right to enter the Tour menu. Or just press the
TOUR
key on the keyboard.
2. Select “
NUMBER
” and set the desired number by pushing the
Joystick
to the left or right.
3. Choose a blank position to be programmed by pushing the
Joystick
up, down, right, or left.
