NUVIA HYDRO GUARD, Руководство пользователя

Страница: 4 / 12

4
V
1 2
3
Ø V
5
4
3 only in case of installation
with feed pump
TYPE OF
FITTINGS
BSPP
parallel
ISO 228
Fit to all housings
except NPT
marked housings
NPT
tapered
ANSI/ASME B1.20.1
Use only
with NPT
marked housings
USE ONLY
SEALING
TAPE AS A
SEALANT
DO NOT USE
LIQUID
SEALANTS
OR GLUES DO NOT USE
GREEN
PASTE DO NOT USE
HEMP
IN
IN
OUT
OUT
IN
OUT
IN
IN OUT
VV
IN OUT
IN OUT
Modes for presentation of inlet and outlet directions (arrows) in different filter
housings models
INSTALLATION LAY OUT
- Connect to pipes using parallel fittings (BSPP) only in the case of housings not
specified as NPT in the sticker, preferably with flexible hoses.
- Use only sealing tape as a sealant for the connections.
- The installation of a By-pass is recommended (see Fig. C).
- If the housing is provided complete with cartridge, remove the protective plastic wrap
from the cartridge before the use.
- Refer to Fig. D for step-by-step instructions for the insertion of a (new) cartridge.
Start Up
- Keep the housing package with sticker (Data Plate) to identify the product.
- Ensure that the sealing is tight and secure.
- After the installation, run the tap and let the water flow for at least 5 minutes before use.
The initial quality of the water will not be optimal unless
the tap runs for at least 5 minutes before use.
A
B
C
Ø
V min V max
1/4” 0.8 gal (3 l) 1.32 gal (5 l)
1/2” 3.17 gal (12 l) 4.76 gal (18 l)
3/4” 5.28 gal (20 l) 6.60 gal (25 l)
1” 9.25 gal (35 l) 10.57 gal (40 l)
1”1/2 21.13 gal (80 l) 22.45 gal (85 l)
Make sure that there are no water leaks from the
product, and especially control the tightening between
the housing head and the housing sump. In case of
leakage, open the housing, remove the o-ring from the
bowl, place a new o-ring and apply lubricant.
Nuvia_3P_INSTRUCTIONS.qxp_Layout 1 10/11/21 09:22 Pagina 4