NUVE EN 300, Руководство пользователя

Страница: 9 / 20

8
3.4 MAINS SUPPLY

The incubator requires 230 V, 50 Hz.

Please make sure that the supplied mains matches the required power ratings.
Always plug-
in the ıncubator to correctly grounded sockets.
3.5 PRIOR TO INCUBATION
Plug the instrument in to a grounded socket.
Check the followings,

Make sure that the safety thermostat is adjusted to the temperatures which are higher than
the set temperature.

If it is necessary the ventilation hole is open to discharge the gases and the vapours which
occur during incubation.

Liquids are not heated in sealed containers.

The boiling points of the samples are higher than the set temperature.

Liquids which may expand during heating do not overflow from their containers.

The vapours and gases which are generated during the operation are not harmful to humans
or flammable or explosive.

The set temperature does not destroy the structure of the samples.

Plug the power cable into a grounded socket.
The safety thermostat set value should always be set to a value which higher than the
working temperature.
NOTE :
Never use explosive, flammable, acidic or toxic liquids. Read carefully the functions of
the control panel.
SECTION 4
OPERATING PRINCIPLE
4.1 SWITCHING ON

Push On/Off switch.

See that the microprocessor control system activates.

Set the values and start the operation.
A supply fitted with a circuit breaker should be used for protection against indirect
contact in case of an isolation fault.