Nuvair MCH36 Silent Touch Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 56

background image

MCH36 Silent Touch

Nuvair

Page 22

www.Nuvair.com

5.1

Protective Clothing

All operators must use accident prevention items such as gloves, hard hat,
eye goggles, accident prevention shoes and ear defenders against noise
(Figure 11).

5.2

Emergency Equipment

Make sure first aid supplies and a fire extinguisher rated for use on
electrical equipment is nearby. In the United States, e

xtinguishers with a

Class C rating are designed for use with fires involving energized electrical
equipment.

5.3

Checks and Maintenance

When work is being performed on the compressor, a

pply “DO NOT USE”

signs on all sides of the compressor to prevent accidental startup of a
compressor undergoing repair/maintenance (Figure 12).

Inspect the compressor carefully every day it is used as per the checklist
given in this manual.

6.0

Safety Information Labels: Location & Description

Safety information labels are affixed to various parts of the compressor
unit. Understand the meaning of each label and follow any instructions
given on any label.

1. General operation warning label:

“Do not use the compressor without having first read the instruction

manual supplied with the machine and observed the instructions. The user shall pay all necessary attention
and adopt appropriate control devices, safety and protection for vessels which have indicated, on the test
certificate, maximum working pressure lower than that indicated on compressor.

”

2. Condensate discharge information label. Indicates position of condensate discharge valve. To discharge

the condensate, see section 13.16.

3. Lubricating oil information label. Check oil level daily before starting the compressor. See section 9.1. Only

use compressor oil authorized by the
manufacturer. See section 13.8.

4. Oil drain label. Indicates the position of

the lubricating oil drain taps. See section
13.8.

5. Air filtration cartridge change information

label. To change the filter element, see
section 0.

6. Cooling fan direction of rotation

information label. When using the
machine for the first time each day, check
that the fan rotates in the direction
indicated by the arrow. On a three-phase
electric motor compressor, if the fan
rotates against the direction of the arrow,
invert two of the three phases on the main
power lead. See section 14.2.

Figure 13. Safety information label locations.

Figure 11. Protective clothing examples.

Figure 12.

“Do Not Use” sign.

«
...
20
21
22
23
24
...
»

Содержание MCH36 Silent Touch

























































Отзывы:

Нет отзывов

Похожие инструкции для MCH36 Silent Touch

Бренд: Doosan Страницы: 66

Бренд: Dorin innovation Страницы: 51

Бренд: Kobalt Страницы: 39

Matsushita S51C90JAU6

Бренд: Panasonic Страницы: 2

Matsushita QA51K13GAU6

Бренд: Panasonic Страницы: 2

Matsushita QA91K22CAU6

Бренд: Panasonic Страницы: 2

Matsushita DD66C12GBU6

Бренд: Panasonic Страницы: 2

Matsushita DD57C94GBU6

Бренд: Panasonic Страницы: 2

Бренд: EKOM Страницы: 78

Бренд: EKOM Страницы: 104

Бренд: EKOM Страницы: 108

Бренд: EKOM Страницы: 136

Бренд: Powerex Страницы: 16

Бренд: Sanborn Mfg Страницы: 24

Бренд: California Air Tools Страницы: 17

Бренд: Atlas Copco Страницы: 44

Бренд: RIDGID Страницы: 36

Бренд: Boss Страницы: 46

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды