Intelligent Surveillance Solution
Software Installation
page-
6
SOFTWARE INSTALLATION
SCB-C31 POS data capture convertor
Step 1: Use IE-browser to setup SCB-C31A POS, the default IP address is
192.168.1.1
Step 2: Setup IP address and password, and then setup IP address.
Note:
Each time you switch the page of the web, please click
Save
at first. If you leave this page without saving, all changes
will be ignored.
Step 3: Setup Password if needed. Password is only using to activate a
security feature on the serial server. Once a password is entered
it will be required to access the menu and make change of
configuration when access.
Note:
Please write down the Serial number and MAC address,
these two parameters are necessary when user forget your
password.
Step 4: Setup according to your POS or Cash Register. Usually all
devices are default setting, you can reserve your time to pass
this step.
Step 5: Please
restart/reset
the box after changing configurations to
active setup.
To reset the unit manually apply power, insert a small plastic
