Install condensation
collector.
Install:
On back of cooker base , align grooves of the condensation
collector over tabs and push condensation collector until it locks into
place.
The condensation collector collects excess water in the cooker rim
produced during the cooking process to prevent from interfering with
other protection features. It must be installed before cooking and
cleaned after every use.
Remove:
Pull condensation collector away from cooker base.
Do not pull down to avoid any damage.
Install and remove
anti-block shield
The anti-block shield safely prevents
food from entering the pressure
release hole to avoid blockage and
assist in proper pressure regulation.
Remove:
Grip lid and firmly press
against side of anti-block shield,
pressing towards side of lid and up
direction until it pops off.
Note:
The anti-block shield must be
cleaned frequently to remove dried food
debris.
Install:
Place anti-block shield over
prongs and press down until it snaps
into position.
Note:
Always make sure the anti-
blockshield is assembled in the lid before
using your cooker.
25
24
