2
Control Panel Operation
ON/OFF: Press it to turn unit on or off.
ADD WATER: This light will come on with a long noise 'DI' noise. You will need to add water and press the
'STOP' then the 'START' button to restart the Ice maker.
ICE FULL This light will come on with a 'DI, DI' noise when the ice has reached the maximum capacity of the
storage cabinet. Press ON/OFF button to restart the Ice maker after some of the ice has been taken away.
Operating Instructions
Step 1.
Open the lid and fill the water reservoir with water.
Note: Make sure the water level in the water reservoir is not over the Ice collecting tray.
Step 2.
Connect to the power.
Step 3.
Press ON/OFF button to turn unit on. The ice maker begins to work.
Note: For the first three cycles, the ice may be small and irregular in size.
Step 4
If indicator ADD WATER is red with 'DI' noise, then take out the basket, then add water as per step 1
，
then
press
ON/OFF
to restart the ice maker
Note: If no water is pumped up to the water tray over two cycles but the water in water tank is enough,
then please move the unit ahead a little, then remove the silicon stopper, and let several drops water
runs out.
Step 5
If indicator ICE FULL is in red with 'DI DI' noise, please take out the ice with the scoop.
Note: When the ice collecting tray is full please remove the ice immediately, Do not allow
the ice collecting tray to overfill.
Step 6
Press ON/OFF
button to stop the machine.
