www.NutrichefKitchen.com
2
BEFORE THE FIRST USE
• Remove all packaging materials.
• Clean the baking plates with a damp cloth or sponge.
• Slightly grease the baking plates with a little cooking oil.
• Take care to prevent water from running into the appliance.
PARTS IDENTIFICATION
Before using your appliance for the first time, you should become familiar
with all of the parts. Read all Instructions and Safeguards carefully.
1.
Non-stick Plate
2.
Knob
3.
Power Light (Red)
4.
Ready Light (Green)
5.
Base
6.
Non-stick Plate
USING YOUR APPLIANCE
Before using the appliance for the first time, peel off any promotional materials
and packaging materials, and check that the cooking plates are clean and free
of dust. If necessary, wipe over with a damp cloth. For best results, pour a
teaspoon of vegetable oil on to the non-stick plates. Spread over with an
absorbent kitchen towel and wipe off any excess oil.
NOTE:
When your appliance is heated for the first time, it may emit slight smoke
or odor. This is normal and does not affect the safety of your appliance.
• Place the unit on a level surface making sure it is not in contact with a wall,
corner or curtains.
• Never cut crepes on the baking plate. Use only wooden or heatproof plastic
utensils to avoid scratching the nonstick coating.
• Inset the pin plug into the power outlet, you will notice that the red power
light and the green ready light will go on. Turn the temperature knob to
MAX
and the green ready light goes off. Indicating the appliance is heating up.
1
5
4
3
2
6