NUTOOL NAG230 страница 14 Скачать руководство пользователя

Страница: 14 / 112

COMPONENTS AND CONTROLS (PIC. 1)

OPERATING INSTRUCTIONS

ANGLE GRINDER CONTROLS (PICS. 2 & 3)

Looking  at  the  Angle  Grinder  from  the  top  the  spindle  lock
is  located  at  the  front  centre  of  the  gearbox  casing  (Pic.2).
The location points for the handle (to suit left or right handed
operators) are located each side of the grey gearbox housing
at  the  front  of  the  Angle  Grinder.  A  direction  arrow  to  show

the direction of disc rotation is located at the front of the grey

gearbox housing. The On/Off switch is located underneath the
rear hand grip. Turn the Angle Grinder onto its back and locate
the adjustable disc guard (Pic.3). The drive spindle can be seen

along with the disc locking nut and the backing disc washer

(Refer to installation of the discs).

FITTING THE DISC GUARD (PIC. 4)

NOTE:

The disc guard must be fitted to the Angle Grinder at all

times during use.

Locate the disc guard onto the guard mounting spigot and

SPECIFIC SAFETY INSTRUCTIONS

Warning!

This angle grinder has not to be used for cutting operations.

Pre-fitted disc guard is for grinding use only. If the user needs
to apply it for cutting, the separated cutting guard has to be
purchased.

The protection guard for cutting off is not included as
standard delivery.

SAFETY WARNINGS SPECIFIC FOR GRINDING

OPERATION

a) Use only wheel types that are recommended for your power tool

and the specific guard designed for the selected wheel.

b) The guard must be securely attached to the power tool and

positioned for maximum safety, so the least amount of wheel is

exposed towards the operator.

c) Wheels must be used only for recommended applications.
d) Always use undamaged wheel flanges that are of correct size and

shape for your selected wheel.

e) Do not use worn down wheels from larger power tools.

SAFE USE OF ANGLE GRINDER’S GRINDING DISCS

Warning!

Under no circumstances should any type of diamond

coated disc be used for grinding metals.

Grinding discs are breakable and should be handled with the

utmost care. The use of damaged, incorrectly mounted or worn
grinding discs is dangerous and can cause serious injury.

Grinding discs should be handled and transported with care
grinding discs should be stored in such a way as to prevent
mechanical damage and contamination with substances that

could cause deterioration of the bonding material.

The information on the grinding discs relating to restriction
of use, safety indications or any other information should be

followed. In case of doubt concerning the correct selection

of grinding discs the user should request information from the

manufacturer or supplier.

Before mounting and before each use the grinding disc should
be visually inspected for any cracks, chips, excessive wear,
contamination or any other damage that could affect safe

operation.

The grinding disc should be mounted in accordance with the

instructions in the product manual. After mounting the grinding

disc should be run for a reasonable time, if any unusual noise
or excessive vibration is evident the machine must be stopped

immediately and the cause investigated.
All guards must be correctly and securely fitted and positioned
correctly. The angle grinder must not be used without the guard
fitted.

Personal protective equipment suitable for the work being

carried out should be worn. Personal protective equipment

should include, suitable work gloves, ear protection, eye
protection, respiratory protection and steel toe cap shoes or

boots.

Only use grinding disc suitable for the work being done and

observe all safety instructions and restrictions of use. Use of the
wrong type of grinding disc could result in serious injury.
When using a grinding disc the angle between the grinding disc
and work piece should be between 30° and 40°.

Before placing the angle grinder on the workbench or floor it
must be switched off and the grinding disc must have stopped

rotating.
Angle grinders must not be used above shoulder height.

Grinding discs must not be run at a rotational speed greater

than that shown on the grinding disc.
Grinding discs must be used dry. Using water is highly
dangerous and could result in an electric shock.

Do not use discs that are larger than specified, only use discs

that are rated for the angle grinder.

The rotational speed (RPM) shown on the disc should always be
HIGHER than the rotational speed (RPM) of the angle grinder.

Angle grinder

Spindle lock

Backing washer

Disc clamping nut

Guard