Page 4
MODELS QTXEN080FLT • QTXEN110FLT • QTXEN150FLT
22
22
SERVICE PARTS
99043852A
Key No.
Part No.
Description
1
97016466
Housing
2
97016450
Duct Connector-6"
3
98010102
Wiring Plate
4
99170245
Screw, #8-18 X .375 (2 req’d)
5
97016933
Wire Panel/Harness Assembly
6
99020284
Blower Wheel
7
99080562
Motor (QTXEN080FLT)
99080580
Motor (QTXEN110FLT)
99080565
Motor (QTXEN150FLT)
8
99100491
Isolator (4 req’d)
9
97016901
Motor Plate
10
99250959
Washer #8 (4 req’d)
11
99260558
Nut, Hex Lock #8-32 (4 req’d)
*
97016925
Blower Assembly (QTXEN080FLT)
*
97016906
Blower Assembly (QTXEN110FLT)
*
97016926
Blower Assembly (QTXEN150FLT) (includes key nos. 6 thru 14)
12
99500397
Insulation (QTXEN150FLT only)
13
99420648
Threaded Stud (QTXEN150FLT only) (4 req’d)
14
99260570
Plastic Nut (QTXEN150FLT only) (4 req’d)
15
97016864
Ballast Assembly
16
99260423
Nut, Hex #8-32 (2 req’d)
17
97016867
Grille Assembly (includes key nos. 18 & 20)
18
99140199
Grille Spring (2 req’d)
19
97016888
Bulb, 42W Fluorescent
20
99111287
Lens
21
99111293
Spacer (2 supplied)
22
QTNHB1
Hanger Bar Kit
TAB
INSTALL GRILLE
5. Finish ceiling.
Install ceiling material. Cut out around housing.
6. Attach
grille to
housing.
Squeeze
grille springs
and insert
them into
slots on each
side of
housing.
8. Remove
light
lens.
Carefully
insert a
small flat-
blade
screwdriver
between
grille and
lens. Pry lens out.
7. Push
grille
against
ceiling.
9. Install
light
bulbs.
Insert
fluorescent
bulb
(supplied)
into its
socket.
Purchase a
4W incan-
descent night-light bulb and screw it into its socket.
Replace lens.
SERVICE NOTE
To
remove Blower
Assembly: Unplug
motor (7). Remove
screw (4) from motor
plate (9) flange. Find
the single
TAB
on the
motor plate (located
next to the recep-
tacle). Push up near
motor plate tab while
pushing out on side of
housing. Or insert a
straight-blade
screwdriver into slot
in housing (next to
tab) and twist
screwdriver.
