NuTone InVent AERN110SL, Инструкции по установке и эксплуатации

Страница: 6 / 16

INST
ALLA
TION
AND USE & CARE INSTR
UCTIONS
INST
ALLA
TION
6
9. Finish ceiling, remove mask,
then install grille.
Remove mask from housing. Plug in light. Squeeze
grille springs and insert into slots in housing.
7. Install blower.
Re-install blower. Secure blower with 2 screws from parts
bag and plug blower into black receptacle. Plug in humidity-
sensing control.
3. Remove old fan.
Enlarge ceiling opening (if necessary) to 9¾-inches
(parallel to joist) by 10½-inches (perpendicular to joist).
Leave ductwork and wiring in place.
1
2
4. Fold mounting ears flat against
housing.
RETROFIT
CAUTION
• Make sure that the wiring inside of
the housing does not interfere with
re-installation of the blower.
8. Install housing mask.
Place mask into housing
opening to
prevent drywall
spray and
construction dust
from damaging
blower.
Push grille up against ceiling.
Leav
e this mask in place
to pre
vent
const
ruction dust, d
rywall sp
ray, or paint
from damaging inside of p
roduct.
REM
OVE M
ASK BEFORE
INST
ALLING GRILLE.
Laissez ce masque en place pour empêcher
la poussiè
re de const
ruction, le plât
re ou la
peintu
re, etc
. d’endommager
l’intér
ieur du p
roduit.
ENLEVEZ CE M
ASQ
UE A
VANT
D’INS
TALLER LA GRILLE.
Deje es
ta cubie
rta en su lu
gar pa
ra evi
tar
que po
lvos de const
rucción,
rocíos de
yeso
o pintu
ra dañen el in
terior del p
roduc
to.
QUITE LA CUBIE
RTA
ANTES
DE IN
STALAR LA REJILLA.
99352432A