3
1. P
REPARE
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. S
ELECT
INSTALLATION
TYPE
. . . . . . . . . . . . . . . . . . . . . . . . . 3
3. B
UILD
FRAMEWORK
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 I
NSTALL
UPPER
FLUE
MOUNTING
BRACKET
(
DUCTED
INSTALLATION
ONLY
) . . . . . . . . . . . . . . . . . . . . . . . . 4
5. I
NSTALL
PLENUM
(
NON
-
DUCTED
INSTALLATION
ONLY
) . . . . . . . . . 4
6. R
EMOVE
GREASE
FILTER
(
S
) . . . . . . . . . . . . . . . . . . . . . . . . . 5
7. A
DJUST
THE
HOOD
MOUNTING
BRACKETS
. . . . . . . . . . . . . . . . 5
8. I
NSTALL
THE
HOOD
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9. C
ONECT
WIRING
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
10. D
UCT
CONNECTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11. P
REPARE
THE
DECORATIVE
FLUE
. . . . . . . . . . . . . . . . . . . . . . 8
12. I
NSTALL
THE
DECORATIVE
FLUE
. . . . . . . . . . . . . . . . . . . . . 8-9
13. R
EINSTALL
GREASE
FILTER
(
S
) . . . . . . . . . . . . . . . . . . . . . . . 9
14. O
PERATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
15. C
ARE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
16. R
EPLACEMENT
PARTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
17. W
ARRANTY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TABLE OF CONTENTS
1. PREPARE INSTALLATION
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the retailer.
Make sure that the following items are included:
- Hood
- Decorative flue assembly (lower and upper flues)
- Upper flue mounting bracket
- Aluminum grease filter(s)
(1 for 24-in. width hood, 2 for 30-in. and 36-in. width hoods)
- Installation
instructions
- Parts bag: 6 M4 x 38 Phillips round head mounting screws,
2 M4 x 12 Phillips round head screws,
2 washers,
3 wire connectors
Parts sold separately:
- Ducts, elbows, wall and roof caps.
- Optional flue extension for
ceilings of 9 ft. or more: models AEEW43SS (stainless
steel) or AEEW43BLS (black stainless steel).
- Non-duct kit model ARKEW43, mandatory for non-ducted installation.
NOTE: During installation, protect countertop and/or cooktop.
2. SELECT INSTALLATION TYPE
2.1 N
ON
-D
UCTED
I
NSTALLATION
The ARKEW43 non-duct kit is required for a non-ducted installation.
2.2 D
UCTED
I
NSTALLATION
Plan where and how the ductwork will be installed.
A straight, short duct run will allow the hood to perform most efficiently. Long duct
runs, elbows and transitions will reduce the performance of the hood. Use as few of
them as possible. Larger ducting may be required for longer duct runs.
Install wall or roof cap. Connect 6” round metal ductwork to cap and work back
towards the hood location. Use 2” metal foil duct tape to seal the joints.
2.3 A
LL
I
NSTALLATIONS
The minimum hood distance above cooktop is 24”. A maximum of 30” above
cooktop is recommended for best capture of cooking impurities.
Distances over 30” are at the installer and users discretion providing that ceiling
height and decorative flue length allow it.
NOTE: Ceilings of 9 ft. or more require flue extension model AEEW43SS (stainless
steel) or AEEW43BLS (black stainless steel).
6” R
OUND
DUCT
R
OOF
CAP
6” R
OUND
ELBOW
W
ALL
CAP
H
OOD
D
ECORATIVE
FLUE
HH0282A
24”
MINIMUM
ABOVE
COOKING
SURFACE
WARNING
!
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
HR0225A
(1) D
ECORATIVE
FLUE
ASSEMBLY
(1) U
PPER
FLUE
MOUNTING
BRACKET
(1
OR
2) G
REASE
FILTER
(
S
)
(6) M4
X
38 P
HILLIPS
ROUND
HEAD
SCREWS
(2) M4
X
12 P
HILLIPS
ROUND
HEAD
SCREWS
(2) W
ASHERS
(3) W
IRE
CONNECTORS
