9 By Firstech, LLC
By Firstech, LLC 8
Remote-Pager Learn Routine
If you replace or add additional remotes, you can program up to three remotes, please perform the following procedure:
Step1 :
Activate Valet/Programming mode by manually turning the ignition on and off five times (between Acc and On) with car key within a 10 second
period. The parking light will flash once with successful completion of this step.
Step2 :
Within a 10 second period after cycling the ignition for the 5th time, press button I. The car parking lights will flash once to confirm that the
transmitter has been programmed. Continue program the additional remotes. The parking lights will flash two times whenthe programming mode is expired.
Alarm Mode
You can arm or disarm alarm mode by pressing Button I for a 1/2 second. Press Buttons (I+II) for a 1/2second to make your car siren
mute when arming or disarming your vehicle. Keep in mind that your car siren will still activate for all other modes (i.e. panic, alarm,
shock sensor) regardless of whether or not your car siren is in mute mode. The car siren will be mute only when arming or disarming
your vehicle. In alarm mode, the starter kill function (this maybe an optional feature provided by your installer) is activated.
This feature disengages the starter mechanism on your car that prevents you from starting your car even with a manual key when your
vehicle s alarm mode is activated.
Note :
If you lose your remote after you have armed the vehicle, use your key to open the vehicle. The siren will go off. Turn on and off
ignition 5 times with your key to shut off the siren and turn the system into valet mode. Cancel the valet mode with remote later. See Valet
mode.
Note :
(Siren duration is 30 to 60 sec depending on the options set at the time of initial installation.)
