![Nustart NU4500R Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/nustart/nu4500r/nu4500r_user-manual_1718253010.webp)
19 By Firstech, LLC
By Firstech, LLC 18
Passive Arming
You can turn this function on or off by pressing Buttons (II+III) for a 1/2 second. When set to passive arming, your security system will arm
automatically 30 seconds after all the car doors are closed. There are two types of passive arming that can be programmed by your
NUSTART dealership: (1) passive arming with passive lock and (2) passive arming with active lock. Passive locking means the door will lock
when the system passively arms. In the default factory setting, the system is armed and locked actively, which means the system will only
arm/lock when the remote-pager is utilized.
Note:
1. If you select both Auto Arming and Passive Arming, Auto Arming takes priority over Passive Arming.
Turbo Mode
If this optional Turbo Mode has been programmed at the time of installation,
you can turn this feature on and off by pressing Buttons (III+IV) for a 1/2 second. Under this mode, engine continues running for 2 minutes
after key has been taken out from the ignition if emergency brake was on when the key is taken out.
To utilize this mode, the emergency brake sensing wire has to be connected to the emergency brake wire of the vehicle. Consult the
authorized dealer for this mode.
2nd Car Mode
The Remote-Pager is able to operate 2nd vehicle.
Press buttons III&IV simultaneously for 1/2 second. If this mode is turned to 2nd Car, the Remote-Pager will not communicate with the 1st
vehicle. To Exit 2nd Car press button III&IV simultaneously again. (Consult your Authorized Dealer)
Cold Start Mode
If the optional temperature sensor has been installed, Timer Start Mode becomes Cold Start Mode, Under this mode, your car automatically
starts if the temperature of the inside of the vehicle goes below the preset temperature.
The minimum interval between the starts will be 1.5 or 3.0 hours depending on preset options during the time of installation. Cold Start
Mode is activated or deactivated by pressing Buttons (II+IV) for a 1/2 second.
OPTIONAL INSTALLATION FEATURES
The NUSTART Nu4500R remote-pager has additional features and expansion possibilities that require additional parts and labor.