JUMBO 7000 HFK SCISSOR
Nussbaum Automotive Solutions, LP | 1932 Jordache Court, Gastonia, NC 28052 | 704.864.2470 | Email:
10
•
Verify the
vehicle
is properly centered on the Lift and
all pads
are properly positioned on the manufacturer
approved lift points of the vehicle.
•
Position the “High Density Blocks” under the pick
-up points of the vehicle as described
by the vehicle manufacturer.
•
Be certain that no bystanders are in or around the vehicle before lifting.
•
Lift up and Push the handle FORWARD (Fig. 1) until the blocks engage the frame.
•
Once the wheels clear the ground, ensure the vehicle is safely positioned by a
generous shaking. If the vehicle appears unstable, lower the vehicle, and reposition.
•
Lift up and Push the handle FORWARD (Fig. 1) to raise the vehicle to the desired
working height making certain that no bystanders are in or around vehicle during the
entire process.
5.3.
To Lower and unload Vehicle
•
Lift up and Pull the handle DOWNWARD to lower the vehicle. The further down the handle is pulled, the faster
the vehicle will descend.
•
Release the handle (Fig. 1) when the vehicle has reached the appropriate working height or has reached its
lowest possible position.
•
Observe the entire lowering process and control the area to ensure bystanders or objects to not enter the area of
the lowering vehicle.
•
When the lift is in its lowest position remove the “High Density Blocks”.
•
If platform extensions have been used for support, lift them and slide all support devices back into their original
positions under the platforms.
•
Drive the vehicle off the lift.
Danger! The platform extensions support must be completely
engaged or the vehicle could suddenly fall
.
Danger! The blocks must be positioned in a safe and secure
manner or the vehicle could slip and fall from the lift. Always
place blocks flat, not on the narrow edges.
Danger! When lowering the lift absolute care must be taken to
ensure that there are no objects or bystanders in the area in
which the lift and vehicle are to be lowered.
Figure 1