Nuovo Egg-Jet 23 Series, Руководство по эксплуатации, Страница: 8 / 17

Nuovo AG
Operating Manual
EGG-JET, Series 23
Page 8/7
Description of the device
Function
The EGG-JET 23 serves for the lettering of eggs in the foodstuffs industry. The lettering is
performed with integrated printing systems with ink cartridges. The patented movement of the
printing head holder leads to regular printing.
Arrangement
See instruction manual in the appendix
Electrical system
The system must be connected correctly to the power supply.
The printing process is set using the selector switch. The data are input using the
programming unit optionally available. (See also Instructions for use in the attachment).
Note: The EGG-JET 23 is already delivered with an egg printing program set in accordance
with the customer’s request. The printing data set can be changed through a PC/Laptop with
the EGG-JET 23 software which is optionally available.
Protective Cover, Safety Switch
Warning: Before opening the control housing, pull the mains plug out.
Commissioning
See operating manual in the appendix.
Malfunctions and their elimination
•
If malfunctions occur, the causes are to be found in the machine as a rule. The following
list facilitates the recognition of the causes of malfunctions.
•
Before the elimination of malfunctions and repairs, the safety regulations are to be
followed.
Malfunctions Cause Remedy
No print
Printer is not active.
-
Switch mains switch on
- Set selector switch button to
printing text 1, 2, 3 or 4
-
Set nozzles mode “On”
(instruction manual in the
appendix)
- Call service centre
Eggs fall over Printing head is too low.
Printing head is too heavy.
-
Adjust the printing head
height
(instruction manual in the
appendix)