Nuovo Egg-Jet 23 Series, Руководство по эксплуатации

Страница: 7 / 17

Nuovo AG
Operating Manual
EGG-JET, Series 23
Page 7/7
Set-Up and adjustment of the machine
Place of use of the machine
The EGG-JET 23 is set up in a trouble-free and safe environment and in a common space for
machines (industrial plant, farm)
Make sure that the machine is properly attached to the
foreign investment.
The room should be dry as well as adequately ventilated and illuminated.
The machine must be freely accessible from at least one side.
The EGG-JET 23 should be operated as horizontally as possible at an ergonomic working
height.
The machine may not be located in rooms where acids or similar chemicals are stored in any
case.
Electrical connection
It is to be ensured that a connection for the power supply is available near the machine.
The machine must be correctly connected to the mains. Power supply 1 x 230 Volt / 50 Hertz.
For improper installation and/or connection, we decline any responsibility.
Warning:
•
Wires in the inside of the machine are under tension. Remove the cover when the mains
lug has been pulled out.
•
Incorrect, improper power supply can lead to overload on the circuits or to a short circuit.
or:
Main switch
Type A
Power supply
230 V / 50 Hz
Main switch
Type B
Fuse: 1AT
Power supply
230V / 50Hz