Nuova Simonelli PRONTOBAR, Руководство пользователя, Страница: 49 / 182

47
EN
Functions that can “ONLY” be accessed from the
TECHNICIAN mode.
2.
COUNTERS
3.
PROGRAM DOSES
4.
SETTING
5.
EXIT
7. PROGRAMMING
LIST OF PROGRAMMABLE FUNCTIONS
Functions that can be accessed from the USER and
TECHNICIAN modes.
1.
LANGUAGE
(LANGUAGE SELECTION)
1 . LANGUAGE
(LANGUAGE SELECTION)
Press the ENTER key to access the sub-
menu. This serves to set the language for the
machine/operator interface, which is shown
on the display.
Press the keys to select the required
language.
The possible languages are as follows: ENGLISH,
ITALIANO, FRANCAIS, DEUTSCH, ESPANOL.
Press RESET to leave the submenu.
Press RESET to quit the programming
function.
7.2 PROGRAMMING IN
USER MODE
7.1 ENTERING THE
PROGRAMMING MODE
With the machine switched on, hold down the
ENTER
key (for about 5 seconds) until the first
program function appears.
The keys available during the programming stage
are:
ENTER key: To enter the menu and/or
confirm the setting.
CURSORS keys: To scroll through the
menu and increase/
reduce settings.
RESET keys: To go back to the previous
step.
LANGUAGE LANGUAGE
7.3 PROGRAMMING IN
SERVICE ENGINEER MODE
To access the functions that can only be programmed
in SERVICE ENGINEER MODE, press the up arrow
key
from the LANGUAGE menu and the display
will read as follows:
Enter the correct password to access the first item
on the programming menu that can be accessed in
SERVICE ENGINEER MODE.
The default PASSWORD setting is 5 times the "2"
key.
Î
Ï
Ð
Í
PASSWORD
_ _ _ _ _