Nuova Simonelli G60, Руководство пользователя

Страница: 6 / 14

1. GENERAL INFORMATION
MANUFACTURER:
NUOVA SIMONELLI - Via M. d'Antegiano, 6 - Belforte del Chienti, Macerata (MC) - Italy
COFFEE GRINDER MODEL:
G60
2. TECHNICAL DATA
DESCRIPTION
Voltage (V)
Frequency (Hz)
Power
consumption (W)
Motor power (W)'
Productivity (Kglh)
Weight when
empty (Kg)
Height (mm)
Width (mm)
Depth (mm)
(*) The value given is for the actual revolutions of the burrs.
8
MODEL
G60
110/120
50/60
480
245
1300/1600
10
9
410
190
290
• Always unplug the machine from the power supply before performing any
cleaning or maintenance operations.
• Do not use water jets or detergents for cleaning the appliance.
• In the case of machine breakdown or malfunction switch the machine off
and do not tamper with it.
• For repairs contact only an authorized service center and request use of
original spare parts.
• Non-observance of the above precautions may make the machine unsafe
for future use.
• Do not leave the machine switched on when not in use. Unplug the
machine when not in use.
• Do not obstruct the ventilation and/or heat dissipation openings and/or
slits nor introduce water or any other liquids into same.
• Should the wire be damaged, have it immediately repaired by the manu­
facturer, his authorized after-sales service, or skilled personnel.
• Never insert spoons, forks or other utensils into the pouring lip
(10) (see
Fig. 1
), or into the coffee grain container
(7) (see Fig. 1)
for any reason
whatsoever while the appliance is operating.
• Always switch off the appliance before removing blockages from the
pouring lip.
• Never place the appliance in water or other liquids.
• Should a foreign body stop the motor, switch the machine off immediately
and contact an authorized service center.
&WARNING
Those machines bearing the "EL. MOTOR WITH THERMAL
PROTECTION" indication are equipped with device which protects
the motor from overheating . .
When this device is engaged, do not attempt to operate the machine:
isolate the machine from the power supply and eliminate the cause of
the trouble before re-starting.
VII