Smart Communication Module
18/24
Limit values for tolerances
/ Total displays
Setting Measured value display
Adjustment single / multiple display
Setting in mm / µm
Activation / deactivation of the
configuration mode
Adjustment single / multiple display
Lokales Netzwerk/WLAN
(wireless) local area network
D24
59.65
48
Figure 18: Submenu “SCM MANAGER - Settings” with SCM-specific parameters
Setting up SCM as an access point
during operation (Restart necessary
by disconnecting the power supply)
Reset device error
Active SCM settings
Error code (Acanto internal)
Figure 19: Schematic illustration of the graphical representation of information using the SCA’s “MONITORING”-assistant
The app also provides a monitoring assistant („MONITORING“), which allows a graphical
monitoring and recording of the information/measured values of the integrated devices in the
network with various options.
Figure 20: Software surface “MONITORING”
