Num'axes Canicom 500, Руководство пользователя

Страница: 29 / 77

Gb - 30
Maintenance
- Avoid cleaning the unit with volatile liquids such as solvents or cleaning fluids. Use a soft cloth and
neutral detergent.
- In order to maintain water tightness, we recommend the replacement of the seal located in the receiver
collar every year.
Troubleshooting
Should your CANICOM 500 stop working or develop a fault, first read this user’s guide over, then check
the batteries (see § Checking/replacing battery of remote control and § Checking replacing battery of
receiver collar) and replace them if necessary and retry. Also check that you are using the product
correctly.
If you encounter any problems, re-code the receiver collar with the remote control (ref. re-coding
procedure).
Re-initialise the system by removing the battery from its housing, then with a metallic tool (e.g.
screwdriver, scissors) touch each of the 2 battery contacts for 2 seconds approximately (ref. Diagram 7).
Insert the battery again: One beep is emitted, indicating the battery is in correct position.
Restart your CANICOM using the remote control.
If the problem persists, contact your distributor.
According to the extent of the malfunction, you may have to return your product for check and repair.
For all repairs, please supply the following:
- the complete product
- the proof of purchase (invoice or sales receipt)
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs
incurred.
Diagram 7
Reset: connect
the 2 supports of
the battery