User’s guide CANICOM 500 PRO – indice B
4/12
Activate/deactivate the CANIBEEP RADIO PRO beeper collar
A magnet located in the remote control is used to either switch On/Off the CANIBEEP RADIO PRO beeper collar.
▪
Activate
: move the remote control towards the collar so that the magnet position indicator on the remote
control comes into contact with the area indicated on the back of the collar, hold for at least 1 second (ref.
Diagram 6). The collar will emit
two low pitch beep sounds
and the red indicator light will flash briefly
indicating
the CANIBEEP RADIO PRO is On
.
▪
Deactivate
: move the remote control towards the collar so that the magnet position indicator on the remote
control comes into contact with the area indicated on the back of the collar, hold for at least 1 second (ref.
Diagram 6). The collar will emit
one low pitch beep sound
and the red indicator light will flash briefly
indicating
the CANIBEEP RADIO PRO is Off
.
To increase the battery life of the remote control and receiver collar, you should deactivate the units if
you are not using them for a long period.
For further information regarding the CANIBEEP RADIO PRO beeper collar
(operation, settings, cautions for use, technical specifications), please read the
user’s guide provided with the collar.
Coding of the remote control and CANICOM receiver collar
Each remote control has its own individual radio operator code. The coding of the remote control with the receiver
collar enables the two units to work together.
IMPORTANT: before beginning the coding (first use of receiver collar or re-coding), make sure no other
person is using his CANICOM 500 PRO or other products from the NUM’AXES range close by: your
receiver collar could accidentally record the code of his remote control. If that occurs, re-code the
remote control with your receiver collar.
CODING PROCEDURE FOR THE 1
ST
USE
1. Activate the remote control: press for 1 second the On/Off red button
located on the side of the remote
control
2. Activate the receiver collar: move the remote control towards the collar so that the On/Off switch magnet
comes into contact with the red mark on the collar, hold for 1 second (ref. Diagram 5).
3. Move the remote control away from the receiver collar.
4. Press the black beeper button
located on the side of the remote control. A beep sound is emitted; the
receiver collar is then synchronized with your remote control.
RE-CODING PROCEDURE (for all coding procedures other than the 1
st
)
1. Activate the remote control: press for 1 second the On/Off red button
located on the side of the remote
control
2. Receiver collar
in position “deactivate” (indicator light off)
: move the remote control towards the collar
so that the magnet position indicator comes into contact with the red mark on the collar, hold
for 6
seconds
. The indicator on the receiver collar lights in fixed green, then flashes in red.
3. Move the remote control away from the receiver collar.
4. Press the black beeper button
located on the side of the remote control. A beep sound is emitted; the
receiver collar is then synchronized with your remote control.
Diagram 6
Activate/deactivate a CANIBEEP RADIO PRO beeper
collar with a CANICOM 500 PRO remote control
Place these two areas
together for 1 second