In
T
O
P
A
K
R
T
N
T
S
d
It
T
In
T
Package contents
- a collar equipped with short contact points
- a neon test lamp
- a 3 Volt CR 2 lithium battery
- a screwdriver
- a pair of long contact points
- this user’s manual
Description of the product
Gb - 12
Switching On the collar
- Remove the 4 screws from the battery cover.
- Remove the battery cover.
- Insert the 3 Volt CR 2 lithium battery paying attention to the polarity indicated on the battery housing
(See diagram 1).
- Sound beeps are emitted indicating the collar is ready to use.
If you do not hear any sound beep after inserting the battery, immediately remove it from its housing.
Check the polarity before inserting the battery once again.
- Replace the battery cover.
- Retighten moderately the 4 screws.
Switching Off the collar
To switch Off the collar, remove the battery from its housing.
Setting screw for barking
detection sensitivity
Polarity “
-
” of the battery
Button to change operating
mode
Diagram. 1
Polarity “
+
” of the battery
Screwdriver
CANICALM INDICE B 2008:CANICALM 15/05/08 18:06 Page 12