Numatic TRO 650/200T, Инструкция пользователя

Страница: 5 / 32

Machine Set-up Guide
5
T 01460 68600
Lift top tank assembly to reveal battery compartment.
Always lift between points as illustrated to ensure personal safety.
Fit battery fuses (contained in start-up pack) into the battery fuse holders as illustrated (Fig.1) .
Remove transit block from pallet (Fig.2) .
1
2
5
Insert key into main control (on / off) and turn quarter-turn clockwise to position (1) ‘On’ (Fig.3) .
Ensure that the forward / reverse switch is set to forward (Fig.4) .
Depress accelerator pedal with right foot and slowly drive machine off of the pallet using the ramp
provided (Fig.5) .
Note: The seat is fitted with a pressure sensor that disables the machine until
an operator is seated.
When the machine is removed and in a safe position, turn key back to the position (0) ‘OFF’ (Fig.6) .
4 3
PLEASE READ BEFORE COMMENCING ANY OPERATION AFTER THE REMOVAL OF ALL
THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
! !
NOTE: ENSURE THAT NO METAL OBJECTS COME INTO CONTACT WITH BATTERY
TERMINALS WHILE THE BATTERIES ARE EXPOSED.
WHEN INSERTING THE FIRST FUSE YOU MAY NOTICE A SPARK, THIS IS NORMAL.
! !
CONTENTS
1 x Owner Manual
2 x Battery Charging Lead
2 x Keys
3 x 40 Amp Fuse (1 spare)
2 x Side pod skirts
1 x Brake disengage key
1 x Maxi Fuse-puller