MixTrack Pro II/Traktor Pro 2.6 User Guide
This document will explain the control surface of MixTrack Pro II as functioning with Traktor Pro 2.6 or
higher. The mapping file will set the GUI of Traktor Pro 2 to best be utilized with the MixTrack Pro II.
NOTE:
Make sure to back up your current setup in Traktor Pro 2 before importing this map, and
follow the steps below to successfully load the Numark MixTrack Pro II TSI file.
Installation:
1. Place
“Numark MixTrack Pro II Traktor Pro Map.tsi” on your desktop or a place on your computer that
is easy to locate.
2. Open Traktor Pro 2.
3. Press the Gear icon in the top left for
Settings.
4. Click
Import
at the bottom of the Settings window.
5. Direct the computer to the location of “Numark MixTrack Pro II Traktor Pro Map.tsi” and click “Open”
6. Leave all of the suggested categories checked to ensure best integration with MixTrack Pro II.
7. Start DJing!!
TOP PANEL
1.
Browser Knob
–
Rotate the knob to cycle through folders and tracks. Press the knob to toggle back
and forth between the library and the tree view (Press BACK to move up to the previous level.)
2.
Load
–
Press one of these buttons while a track is selected to assign it to Deck A or B, respectively,
in the software.
3.
Back
–
Cycles between different views available in the software.
4.
Shift
–
Allows multiple control commands to be triggered when pressed first along with other buttons.
