2
MIXER QUICK SETUP GUIDE (ENGLISH)
Make sure all items listed on the front of this guide are included in the box.
1.
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT
2.
Study this setup diagram.
3.
Place mixer in an appropriate position for operation.
4.
Make sure all devices are turned off and all faders are at “zero”
5.
Connect all stereo input sources as indicated in the diagram.
6.
Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio
sources.
7.
Plug your mixer and other devices into AC power.
8.
Switch everything on in the following order.
•
audio input sources (i.e. turntables or CD players)
•
your mixer
•
last, any amplifiers
9.
When turning off, always reverse this operation by,
•
turning off amplifiers
•
your mixer
•
last, any input devices
10.
Go to
http://www.numark.com
for product registration.
OR
HOUSE/CLUB AMP
CD BURNER
BOOTH AMP
FROM
FADER
START
TO MIC
TO LINE
TO LINE
TO FADER
START
TO AMP
TO AMP
TO PHONO
