CDN15/MPCD3
- The Leader in DJ Technology
©2002 Numark Industries
- 7 -
http://www.numark.com
10. Pitch Range:
actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of
music. Tapping the pitch will toggle slider between 8% and 16% pitch ranges. Holding the pitch for 3 seconds will
deactivate the pitch control.
11. Pitch Range LEDs:
indicate current pitch range. When both LEDs are off the pitch slider is not active
12. Pitch Slider:
By moving the slider in the (+) direction the speed of the music permanently speeds up. By moving the
slider in the (-) direction the speed of the music permanently slows down. To match the speeds of two CDs you can
adjust the pitch. When the tempo of the music of the CD you wish to match is slow compared to the tempo of the
other music, move the slider to the (+) side and match the speed. When faster, move the pitch slider to the (-) side.
By making this adjustment the speeds will be matched though the beats may not yet be aligned.
13. Track Buttons:
These buttons are used to select the track to be played.
14. Program:
•
Press program, the unit will stop and the program indicator will light
•
Select the track to be programmed
•
Press the PROGRAM button
•
Select anther track to be programmed
•
Press the PROGRAM button
•
Press
Play
You can program up to 30 tracks. Press PLAY to start the program. To exit and erase program hold the program
button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.
15. CD Drawer:
Place your CDs you wish to play in here. This unit is designed to play commercially available CD and
properly burned and finalized CDR and CDRW formats. Due to variances on the specification of certain CD burners
and CDs some discs home made CDs may not play properly.
16. Power Switch:
Turn on and turn off the machine with this button. The unit should always be shut down with this
button first before any external power is removed.
17. Infrared Remote Receiver (MPCD3 only):
Used with wireless remote control to adjust functions of the unit. Should
be kept clear of objects that might block the infrared beam of the remote control.
