CDN-23S
- The Leader in DJ Technology
©2000 Numark Industries
- 9 -
http://www.numark.com
LCD DISPLAY FEATURES
1.
PLAY -
Active while the unit is actually playing a CD.
2.
PAUSE -
Active when the unit is paused.
3.
CUE -
Flashing when the unit is setting a cue point. Lit
continuously when the unit is paused at a cue point.
4.
PROGRAM -
Used for preprogramming the track order to
automatically be played by the unit. This is a great function if
you need to leave the CD player alone.
5.
TIME MODE -
(Elapsed) is for showing time as it is taking place.
(Remain) shows how much time is left on a particular track. This
function is controlled by the TIME BUTTON (4).
6.
SINGLE -
Shows when the unit is set to play just one track at a
time. When this is not lit the CD will play continuously through
all tracks. This function is controlled by the SING/CONT
BUTTON (2).
7.
PITCH -
Is lit when the PITCH BUTTON is active.
8.
TIME BAR -
Shows either time remaining or elapsed depending
on the setting of the TIME BUTTON (4).
9.
PITCH/BPM -
Shows the percentage change in pitch or BPM
depending upon mode.
10.
TRACK -
Shows the track that the unit is playing with.
11.
MINUTES -
Shows the minutes elapsed or remaining depending
on mode setting.
12.
SECONDS -
Shows the seconds elapsed or remaining
depending on mode setting.
13.
FRAMES -
The CD Player breaks down a second into 75
frames for accurate cueing. This shows the frames elapsed or
remaining depending on mode setting.
TRANSPORT FEATURES
a)
DISC TRAY-
Place your CD in here.
b)
OPEN/CLOSE (Disc Tray Open/Close) -
Press to load or eject
the disc. Each press will open or close the disc tray on the
transport. NOTE: Tray will not open unless the disc has been
paused.
c)
POWER BUTTON -
Turn on and turn off the machine from this
button. The unit should always be shut down with this button
first before any external power is removed.
d)
RCA AUDIO JACKS -
Connect your CD player to your mixer
from this line level output.
e)
VOLTAGE SELECTOR -
Set this switch to the voltage for your
location.
f)
POWER CORD-
Plug power cord into a power outlet after
checking the voltage.
g)
CONTROL CONNECTOR -
Plug your control cables for each
unit into here and the back of the remote unit.
h)
DIGITAL OUTPUTS -
The format is type 2, form 1, also known
as S/PDIF (Sony/Phillips Digital Interface Format). In order to
use the digital output you must set the digital output selector to
on. This will deactivate the variable pitch slider and the pitch
bend buttons or pitch wheel.
If you were able to adjust the pitch,
other devices will not read the digital output properly.
