CDN-23S
- The Leader in DJ Technology
©2000 Numark Industries
- 8 -
http://www.numark.com
DESCRIPTION CDN-23S REMOTE FEATURES
1.
PROGRAM -
Depress this button and the unit will stop and the
program indicator will light. Select each track to be programmed
and press the PROGRAM button between selections. You can
program up to 30 tracks. Press PLAY to start the program. To
exit and erase program hold the program button down for more
than 2 seconds while the unit is stopped, open the disc tray, or
turn off the power.
2.
CONT/SING -
Will cause just a single track to play or all tracks
in order by pressing once or twice.
3.
LCD DISPLAY -
Indicates all the functions, as they are
occurring, with the CD. These functions are explained in the
next section.
4.
TIME (Time Button) -
The TIME button switches the time
display between elapsed playing time and remaining time on the
track.
5.
OPEN/CLOSE (Disc Tray Open/Close) -
Press to load or eject
the disc. Each press will open or close the disc tray on the
transport. NOTE: Tray will not open unless the disc has been
paused.
6.
TRACK (Track Buttons) -
These buttons are used to select the
track to be played.
7.
Track 10 Button -
This button is for quickly advancing to higher
tracks on a CD.
8.
PITCH (Pitch Button) -
This button activates the Pitch Slider
(14).
9.
PITCH/BPM BUTTON
- Switches the mode of the display
between showing the BPM and the percentage change in pitch.
TAP
- Tap this button with the beat of the music to determine
the current Beats Per Minute (BPM).
10.
SEARCH WHEEL (OUTER RING) -
This wheel has 3 forward
and 3 reverse speed positions for searching through songs.
The more you turn the wheel in either direction the faster you
search through the music.
11.
JOG WHEEL (INNER RING) -
This jog wheel serves 2 functions
depending on the current mode.
a)
The jog wheel will act as a slow frame search control when the
CD is not playing but either paused or set to a cue point. To
set a new frame cue point, spin the wheel then press play
when you have determined the proper position. Press CUE to
return to the “CUE POINT”.
b)
The jog wheel will temporarily bend the pitch of the music if the
song is already playing. When each of the two CD players
is playing a CD, the pitch bend function allows the positioning
of the bass beats to be matched after the pitch of each disc is
matched. Either player can “catch up” or “fall back” to match
the other player. The pitch will automatically rise while the by
rotating the wheel clockwise (allowing “catch up”) and return to
the original pitch when the wheel is released. The pitch will
automatically drop while the wheel is moved counterclockwise
to slow down (allowing “fall back”) and return to the original
pitch when the button is released. By changing the pitch of one
disc with respect to the other in this way the beats can be
matched.
12.
CUE -
Pressing the CUE button during play provides a return to the
position at which play was started. If PAUSE is used before CUE,
that will become the cue point. Alternately pressing the PLAY
button and the CUE button allows the CD to be played from the
same position any number of times. The CUE LED will light up from
the time the CUE button is pressed until the CD has reset to the
position at which play was started. Steady lighting of this LED
indicates the ready condition.
13.
START/PAUSE (Play/Pause Button) -
Each press of the
Play/Pause Button causes the operation to change from play to
pause or from pause to play.
14.
PITCH SLIDER -
The pitch can be changed up to +/-12% by
pressing the PITCH button so the PITCH LED is lit, then moving the
sliding fader. The pitch will not be changed if the PITCH LED is off.
15.
RELAY/FADER START–
Pressing this offers 2 functions. If the
players are set in single mode it will alternate (relay) between
players after each track or in Continuous after each CD. This also
activates the Fader Start function in you CD player when connected
to compatible fader start mixer.
15
