CDN-20S
- The Leader in DJ Technology
©2000 Numark Industries
- 5 -
http://www.numark.com
CONNECTIONS
Typical connection with a mixer is illustrated right.
1.
Connect the output connection cords from the CD Player to the
line inputs of your mixer.
2.
Connect the remote control connection cable from the Unit A
connector on the main unit to the Unit A connector on the
remote control unit. Repeat for Unit B.
3.
The output connection cords and the remote control
connection cables are supplied with the main unit. Be sure to
use the remote control connection cables, which have been
supplied. Use of another cable type might cause damage.
4.
For fader start connect fader start cables
to both side of your CD player to a similarly equipped DJ
mixer, as in the top drawing.
MOUNTING YOUR CD PLAYER
1.
Mount the units in your console or rack with 19” EIA rails
2.
The transport should be mounted not to exceed an angle of 15 degrees.
3.
Your CD player can be affected by excess vibration so mount the units in a
secure environment if possible.
CHECK TO BE SURE
THE FOLLOWING ITEMS ARE IN THIS BOX:
1) DUAL-TRANSPORT PLAYER UNIT
1) REMOTE CONTROL UNIT
1) OWNERS MANUAL (THIS BOOKLET)
2) RCA CONNECTING CABLES
2) CONTROL CABLES
