8
mynugeni.com
Handheld Operation
Charge Up
1. Remove battery insulating tab: pull firmly.
2. Open upper battery cover: grasp top edge and
pull out firmly to “snap” cover open.
3. Connect power adapter to charging port and
insert plug securely into outlet socket.
4. Charge indicator light will illuminate
when successfully connected:
> charging: blinking green light
> fully charged: solid green light
Power Up
1. Press power button to turn unit on
> normal mode: solid green light
2. Press power button again to turn
unit off.
Normal Power
Note: Full charge requires approximately 2.5 hours
T A B
Normal Mode:
22
min.
Turbo Mode:
18
min.
Typical Run Times:
H A N D H E L D
1
1
3
4
2
Push in and slide switch down to
extend on-board brush bristles.
On-Board Brush Tool
1. Press turbo button to activate Turbo
Mode for enhanced suction power.
> turbo mode: solid blue light
2. Press turbo button again to return to
normal mode.
Turbo Power
While vacuum is running in normal mode
1
Use
only the charger provided
to recharge your Nugeni
vacuum. Charge vacuum
with standard electrical
outlet only (120V/60Hz)
WA R N I N G
!
5. When ready to use, unplug power adapter.
6. Lift battery cover back up and press firmly inward
to “snap” cover securely closed.
Online
Help
Videos
