Nuga NM-5000, Руководство пользователя, Страница: 14 / 24

NM-5000
Test Operations after Installation
Power switch
in the main assembly
Controller for main assembly Controller for external projector
Check out the power
supply for the product
Turn on the power switch.
Check out operations of
remote controller
ྙ
Press the power button on the
remote controller
ྚ
Adjust temperature for the
internal projector (+ / – button)
ྛ Adjust temperature for the
external projector (+ / – button)
Refer to ‘How to Use the Remote
Controller’ for each mode
(Page 28)
Check out operations of
sub heater
Turn the dialer to set the desired
temperature in the sub heater
attached to the side of the sub
mat.
Use the product
Lay yourself down with your legs
toward the sub mat and press the
Auto button in the remote
controller for the automatic
operations in the product.
You may use the product while
laying yourself down the other
way around.
Caution
Ensure the power supply to be
turned off after use or during no use.
Otherwise, it might cause failure.
How to Use the Remote Controller
How to Use the Product by Mode
How to Use the External Projector
How to Use the Low Frequency Pad
How to Use the Product
How to Set Temperature for the Sub Heater
28
28
33
34
36
38
How to Use the Product
AUTO MANU
TEMP
MANUAL
ⴚ
ⴘ
ⴙ
NM-5000
On Off
POWER AUTO
PROJECTOR LOW FREQ
PJT
HIGH
LOW