NuForce AVP-16 Скачать руководство пользователя страница 9

 

5.

 

Settings 

 

Main Volume 

The Volume knob on the AVP-16 and the Volume control buttons on the remote 

control adjust the main volume level of all speaker channels simultaneously. 

 

On Screen Display: 

note that for the On Screen Display to function properly the 

video input format (Composite, Component, or S-Video) must match the video 
output format, and the correct input source (DVD, CABLE, VCR, or AUX1) must be 
selected.  Using the On Screen Display on a large screen TV monitor makes the 
MENU options much easier to view and set. 
 

 

AUDIO SETUP 

 

Tone Controls 

Push the 

FUNCTION

 knob in to go to the main MENU, then rotate the function 

knob to “Audio Setup” and push the Function knob in again to enter the “ADJ 
Treble” mode.  Pushing the Function knob once more will then display “Treble 00” 
and rotating the Function knob will increase or decrease the /- 10dB in 2dB 
steps.  Once set, pushing the Function knob returns to the “ADJ Treble” position 
and rotating the Function knob clockwise will bring you to the “Adj Bass” mode.  
Pushing the Function knob in will display “Bass 00,” and bass may be inc/- 
10dB by rotating the Function knob (clockwise for more bass or counter-clockwise 
for less bass).  Note that all functions are similarly accessed and adjusted by using 
the Function knob.  Since most users will be using the remote control to access the 
MENU and set parameters, the AVP-16’s many features and settings are described 
using remote control access below. 

 

 

Remote Control: 

The NuForce AVP-16 Remote control is designed to access and adjust all the 

functions and settings of which the AVP-16 is capable.  In addition to navigating 
the main and sub-menus, there are many 

short-cut buttons

 (See Section 2: Remote 

Control) on the remote that provide more direct access to the most often used 
features and adjustments.  These short-cut buttons allow direct access to audio and 
video inputs, DSP, Dolby, and DTS processing as well as speaker level adjustments 
for the center channel and subwoofer.  These direct access buttons eliminate the 
need to scroll through the main and sub-menus.  The two included 

AAA batteries

 

may be installed by removing the two small screws in the bottom panel of the 

Содержание AVP-16
















Отзывы: