NuForce AVP-16, Руководство пользователя, Страница: 7 / 15

8) VIDEO OUTPUT SELECT: When input selection is DVD, EXT7.1CH 、 CABLE or
AUX1
，
the output selection goes between CVBS (composite video), S-Video (Y/C,
or Super-VHS), and YPbPr (component video up to 1080i). If the input selection is
VCR, only CVBS or S-Video is available.
9) DISPLAY: Shows the input/volume status, processing mode, and bit-stream
information.
10) MUTE: Mutes and reactivates the sound.
11) MENU OPERATION KEYS: Press MENU to get into the main menu, and press
Menu again to exit. The
▲ / ▼ buttons move cursor up/down. OK/EXIT
：
Press Ok to
confirm selected function. Press Exit to return to your prior selection.
12) VOLUME: ▲ / ▼ Volume control raises and lowers audio level in 0.5dB steps.
13) CENTER: adjusts the center channel using VOLUME ▲ / ▼
14) SUB: adjusts the subwoofer channel using VOLUME ▲ / ▼
15) SETUP ： Use in conjunction with On Screen Display (connect CVBS or S-video to a
TV/Projector). The video display will show adjustable parameters, use ▲ / ▼ to
select, and hit “OK” to set, then hit ▲ / ▼ to change values. Press ‘EXIT’ to save and
exit the current setting.
3. On and Off
When first tuning on the AVP-16, the unit goes through an initialization routine, and
will display NuForce, AVP 16, then reverts to the previously selected input and
volume setting. Note: if the volume was set higher than 60 when turned off, on the
next power-on cycle the AVP-16 will ramp up to an initial volume level of 60.
4. Input Selection
Combinations Supported
Audio Input Mode Video Output Mode
Input Analog Coaxial Optical CVBS S-Video YPbPr
DVD
CD
Cable
Aux1
Vcr
Tape
Aux2
7.1Ch
With Remote Control
：
1)
Select:
“7.1CH,” “DVD,” “CD,” “CABLE,” “VCR,” “TAPE,” “AUX1,” or
“AUX2.”