nuPro XS-8500 RC
· 09/2022
6
Care and cleaning tips
Caution!
Improper handling of the speaker may result in damage.
• Always unplug the speaker before cleaning it!
• Before recommissioning, make sure that all connections are correct,
that there are no short circuits and that the speaker is completely dry.
• Never use strong cleaning agents or solvents such as petrol, spirit
or similar!
Enclosure
We recommend commercial window cleaner sprayed onto a cotton
cloth. This allows almost all fingerprints and dust to be easily removed.
Alternatively, you can also use window active foam.
We advise against the use of microfibre cloths! These can cause mini
scratches in the surface.
Diaphragms and Speaker Chassis
To remove dust from a loudspeaker chassis, a lint-free cotton cloth is
sufficient to wipe the membrane lightly with very little pressure.
Unpacking and Scope of Delivery
Unpacking
When unpacking your speaker, do not use sharp or pointed objects to
avoid possible damage to the enclosure. Please keep the packaging in a
safe place in case you need to transport the speaker at a later date.
Scope of delivery
If the delivery is complete, it contains the following parts:
1 nuPro XS-8500 RC active loudspeaker
1 Cloth grille
1 Remote control with battery
1 Mains cable, 3 m
1 Fibre optic cable with TOS-Link plugs, 1.5 m
1 Stereo 3.5mm jack to cinch cable, 1.5 m
1 High Speed HDMI Cable with Ethernet, 1.5 m
Auto power off
The nuPro XS-8500 Soundbase can switch to the stand-by mode via an
automatic power off function. The behaviour depends on the chosen
input. If either Bluetooth or AUX is selected, the loudspeaker switches
to standby mode after a maximum of 20 minutes without audio input.
With the digital inputs (SPDIF, Port), the auto-off circuit also reacts
directly to the absence of a digital data stream and thus allows for a
faster switch-off. The playback device must deactivate the data stream
accordingly. When switched to the HDMI eARC input, the auto off cir-
cuit reacts directly to the appropriate CEC command, transmitted from
the TV system.
Note: The auto power off function can be enabled or disabled by enter-
ing the main menu of the speaker and navigating to:
> advanced
> auto power
If the menu item
off
is selected here, this function is disabled.
Auto power on
The electronics of the soundbase have an automatic switch-on func-
tion, that automatically wakes them from stand-by mode as soon as a
sound signal or data stream is present. The signal must be applied to
the input that was selected during the automatic switch-off process.
• This function is not available for Bluetooth devices.
• At the other inputs, Auto power on is only active if the soundbase is
set to standby mode by the Auto power off function. If standby mode
has been set manually by pressing the button on/off on the remote
control or the app, the automatic switch-on function is deactivated.
Mode of operation
Wireless mode: X-Connect active
To connect loudspeakers/devices via wireless network (X-Connect
Surround), navigate to the
> ch config
section of the menu. Choose the desired channel and select
> new pairing
.
The wireless network is activated automatically.
In this mode, the stand-by power consumption is <2.0 Watt.
Standard mode: X-Connect not active
To deactivate the wireless network (X-Connect Surround), all items in the
> ch config
section of the menu must be set to
> none
or
> pre out
.
The wireless network is deactivated automatically.
This mode is the factory default.
In this mode, the standby power consumption is <1.0 Watt.
Service
If you have any questions or problems during the commissioning of
your Nubert system, please do not hesitate to contact our service team:
Phone: +49 7171 8712-0 (international) · E-mail: [email protected]
Please have your customer number ready!
