The remote control of the nuPro allows direct access to the perma-
nently required functions:
on/off
After switching on the loudspeaker, using the mains-switch on the
back of the speaker, the nuPro is in stand-by or auto-on mode. Use
the power key on the remote control to activate or deactivate the
speaker.
Switching the speaker into standby using the app or the remote
control deactivates the automatic power-on feature.
volume
and
x (mute) keys
The volume can be adjusted with the
volume
keys. The mute
x
key
allows you to mute and unmute the speakers.
bass
and
mid/high keys
The remote control also allows an uncomplicated adjustment of the
sound character of the nuPro speakers. The
bass
keys allow the
bass intensity to be raised and lowered, while the
mid/high keys
can
be used to adjust the mid/high range by up to +/- 10 dB . For more
information, refer to section
Tilt contol
on page 13.
xlr, aux, coax, opto, (bluetooth)
and
usb
These 6 buttons on the remote control below are for source selec-
tion. Pressing a key repeatedly toggles between sources as shown
below:
Remote control
p1 · p2 · p3
With these buttons you can directly recall 3 presets, which you can
make and save in the setup. Alternatively, a preset can be stored by
pressing and holding the respective button (see page 12).
nuPro X loudspeakers and nuPro soundboards
Remote control signals
The remote control signals from the nuPro Active speakers and
soundbars do not interfere with each other, making it possible
to use combinations of speakers and soundbars simultaneously
without accidentally operating the wrong speaker.
xlr
aux
XLR analog
AES/EBU
Aux
coax
opto
Coaxial 1
Coaxial 2
Optical 1
Optical 2
usb
Bluetooth
USB
Digital Port
As an alternative to the remote control, you can also control
the nuPro X-Series speakers with the Nubert X-Remote App,
downloadable to your mobile device free of charge via the App
Store or Play Store.
It offers the possibility to easily adjust all settings of the active loud-
speakers comfortably from the listening position.
The app is intuitive and easy to use thanks to easy-to-understand
graphics.
With the X-Remote App, you can adjust all settings of the nuPro
X-series from the comfort of your listening position. This is particu-
larly useful when using the
X-Room Calibration
function.
Room influences often cause problems such as boominess or dips in
the low-frequency range. The X-Room Calibration algorithm utilizes
the powerful DSP of the nuPro X-series to optimize the frequency
response in the low frequency range for an optimal listening experi-
ence with precise, dynamic bass.
Simply start the measuring procedure in the app from the listening
position. The speakers now play a test tone which is picked up by
the microphone of your smartphone. Based on the measured data,
the app analyzes and adjusts the low frequency response of the
loudspeakers so that you can enjoy optimal sound quality at the
listening position. You can switch the room correction on or off.
Please note:
For Android devices, the USB measurement microphone “Nubert
XRC Android Interface” is required to use the X-Room Calibration.
Nubert X-Remote App
Password entry:
The first time you pair the X-remote app with a nuPro X device, you
will be prompted to enter a password. The default password is 0000.
A different password can be assigned in the menu to protect the
device from unauthorized access. If the device is reset to the factory
settings (default), the password is also reset to 0000.
X-Room Calibration
8
nuPro X-8000 RC
· E12 · 03/2022 EN
