USB-connection to a computer
Select the USB input on the nuPro master-loudspeaker.
Windows 10 / 11
Automatic Installation
Connect the master speaker to your computer with a suitable USB
cable (included) and switch on the loudspeaker. Normally, Win-
dows will automatically install the correct driver and set the spea-
ker as the default playback device.
Selecting the playback device manually
If the loudspeakers are not set as the standard playback device
automatically or if you want to select a different playback device,
open the system settings and navigate to
> System settings
> System
> Sound
> Output device
Click on the desired output device.
Manually selecting the output format in shared mode
Windows allows you to set which sound output format should be
sent to the USB-DAC when operating in shared mode. To do this,
navigate to the > Output section as described above. Click on the
speaker whose settings you want to adjust. You can now select
the output format from the drop-down menu.
Within Windows 10, navigate to
> System
> Sound
> Device properties
> Advanced device properties
> Tab “Advanced”
Note:
Playback from applications that uses the exclusive mode
is not affected by this setting. In this case, the output settings are
determined by the application.
macOS
Automatic installation
Connect the master speaker and the computer using the supplied
USB cable and turn on the loudspeaker. Normally, macOS will
automatically install the correct driver and set the speaker as the
default playback device.
Manually selecting the output device
If the loudspeakers are not set as the standard playback device
automatically or if you want to select a different playback device,
open the system settings and navigate to
> System settings
> Sound
> Output device
Click on the desired output device.
7
nuPro X-6000 RC
· E12 · 03/2022 EN
